Pool cages are important for all those homes that are in Tampa Bay, Florida. If you are thinking why, it is so, then it is fundamental to understand the kind of weather it holds, the protection required from the debris and rodents, etc. Not just that, sun exposure in Tampa Bay is such that it gives way too much direct sunlight, and hurricanes reduce the lifespan of the pool enclosure.

Without maintenance and regular care, pool cage screen repair will remain expensive and won’t look as appealing as it should. Even if you have done all the necessary requirements, there will always be a need to know and understand the practices that extend the life expectancy of the pool enclosure.

And yes, before you go on to read, let us explain why pool maintenance matters, what may cause the damage, and how our best expert tips maximize the life of your enclosure in this guide.

Table of Contents The Need of Pool Cage Screen Repair Tampa Bay What Causes Damage in the Pool Enclosures? How to Know if it is the Right Time to Get the Pool Cage Screen Repair Tips on How to Extend the Life of Your Pool Cage Screen Frequently Asked Questions

The Need of Pool Cage Screen Repair Tampa Bay

Unfortunately, the ambiance and environmental beauty lie at the mercy of the weather and the way it keeps the residents busier than usual. With climate change, you get to notice and experience hurricanes, storms, harsh weather, and crazy sunny days. Even though the weather is on both extremes, mostly the days and nights remain warm; somewhat enjoyable. But it also comes with some stressors: the pool and its unprotected enclosures.

What happens in the strong sunlight?

• The fiber of the screen has the potential to weaken with time.
• Once there is no regular maintenance, mesh becomes brittle and loose.
• Discoloration starts because of the UV exposure of the sun on the material.
• The screen tends to lose flexibility and makes it vulnerable to cracks and splits.
• Tears and tiny holes develop easily after strong winds and hurricanes.

Note: When minor repair issues are ignored for too long, the prospects of restoration are always on the heftier side. That’s why we encourage Tampa Bay homeowners to schedule pool cage screen repair sooner.

What Causes Damage in the Pool Enclosures?

Repairs are easily handled. All you have to do is know the common causes that damage the pool enclosures. For example;

UV Exposure to Screen: Being the owner of a house in Tampa Bay makes you super careful of the intense weather conditions of Florida. It means you don’t worry about the sunlight and its damage to the pool, or know how screen materials break down, fade, and weaken the pool materials. You are living in a delulu (delusional) world.

Hurricanes and Storms: Without the maintenance and proper care of the materials and pool enclosure, high winds will loosen the panels of the screen. This is mainly because of the fact that the stretches are seen in the mesh and, at times, the entire sections are torn because of the high wind.

Salt Air Weathering: Regular salt in the air increases the possibility of corrosion of aluminum frames, panels, fasteners, hardware, and screws. Taking care of this side of the screen is also a must (which is possible through regular maintenance).

Debris and Branches of the Tree: It goes without saying that branches scrape off the pool screens during windy conditions. Also, they tend to fall on the screen and can puncture or tear off mesh.

Aging Materials in the Pool Screen: Sadly, the most aged materials have the potential to wear out from years of exposure to Tampa Bay’s climate.

Note: All these situations cause damage to the pool enclosure and the screen. To ensure the pool cage screen repair Tampa Bay justifies the fixtures, hire the most professional third-party services. By the way, the most trustworthy company in Tampa Bay is “Pool Screen Repair Tampa Bay”.

How to Know if it is the Right Time to Get the Pool Cage Screen Repair

The worst decision for any homeowner in Tampa Bay is to fix the most fixed pool cage screen or its enclosure. See, it is pretty easy to understand that not every damage needs urgent repair. You need to recognize if the damage is too early to fix or not.

Review the following to determine repair urgency.

• Small holes or tears in the screen demand prompt repair.
• Rusty fasteners and/or damaged spline
• Sagging or loose screen panels
• Visible corrosion
• Discoloration on the screen material
• Bent aluminum framing
• Collected debris in the pool
• Insects entering the pool’s enclosure

Note: There is a need for instant repair and attention by professionals if one of the above-mentioned problems is noticed.

Tips on How to Extend the Life of Your Pool Cage Screen

Tip 1: Screen and its Regular Cleaning

We know that algae, mold, dust, pollen, and salt usually build up over the years. To keep the pool screen away from all the mess, you must clean it once every three months. Please don’t do the following;

• Clean the screens with pressure washers.
• Mesh damages easily, so don’t stretch it at any point.
• To avoid discoloration, keep your enclosure tidy for the home buyers.

However, to ensure that the material is not too harsh and the maintenance remains at a top level. You must use a soft brush, a garden hose, and the mildest soap.

Tip 2: Thorough Inspection Once a Month

To make sure the pool cage screen repair is top-tier, you must check the pool enclosure at least once a month. The inspection should be carried out carefully, from all sides and corners. We have a list of things to look for and inspect in the enclosure.

Screens, doors, frames, and fasteners must be checked. However, the following must be looked at to repair the damage;

• Loose edges of screen
• Missing screws
• Tiny holes
• Bent frames
• Corrosion

Note: The sooner you find the damage, the better it will be in terms of repair cost.

Tip 3: Immediate Repair of Any and All Damages

To many of us, small holes and tiny wear and tear remain insignificant. Because of that, homeowners seem to postpone the repairs. Unfortunately, doing so only makes the tiny holes bigger. That calls for instant pool cage screen repair.

Why is it so? Well, quite frankly, it is to prevent the pool enclosure from birds and their mess, insects, debris, and salt corrosion.

Tip 4: Trimming of the Trees and Branches

What’s next? In cases where you have trees and branches in the territory of the pool enclosure, it is a must to remove them regularly. The need of it is primary because of the fact that the branches cause constant friction, right? Such brushing and abrasion make the screen weak. So, before hurricane weather comes in the forecast, you should remove all the trees, bushes, and branches; everything should be removed. However, vegetation must be at a safe distance from the pool (to reduce accidental damage).

Tip 5: Wash the Salt Buildup in the Screen

Unfortunately, salt builds up around the coastlines, and Tampa Bay has the biggest threats to aluminum structures. So, to keep the frame away from salt buildup, rinse it with clean and fresh water after every couple of weeks. It will reduce corrosion. Also, pay attention to the following areas to extend the lifespan of the hardware (as well as the frame);

• Screws
• Structural joints
• Fasteners
• Door hinges